Sensor Compatibility
Use the sensors you already own
Agrinodes can configure and integrate almost every farming sensor on the market. Search your exact brand and model in our Supported Sensors directory. If it is already listed, you can use it straight away. If not, submit a sensor request and we can usually configure it within up to a week.
Choose your precision
~$20
Analogue soil probe
Basic analogue moisture stick — perfect for hobby growers or expanding coverage affordably.
~$2,000
SDI-12 industrial sensor
Research-grade SDI-12 multi-parameter sensor — lab-level accuracy for commercial operations.
Protocol support
ADC (0-5 V, 4-20 mA)
Standard analogue inputs for voltage and current-loop sensors.
SDI-12
Serial data interface for multi-parameter environmental sensors.
RS485 / Modbus
Industrial serial bus for commercial-grade instrumentation.
Pulse / Frequency
Counting inputs for flow meters, rain gauges, and anemometers.
- Moisture
- Electrical Conductivity
- Temperature
- Oxygen
- Air Temp
- Humidity
- CO₂
- Light
- Flow
- Pressure
- Tank Level
- Rainfall
- Wind
- Solar
- Pressure
Will your sensors work with Agrinodes?
Relay Control
Control anything relay-driven
If it can be switched on or off with a relay, Agrinodes can control it — from basic solenoid valves to complex greenhouse systems.
Remote Monitoring & Control
See everything. Control everything.
Growers save an average of 2 hours per day by replacing manual inspections with real-time visibility and remote control from a single app.
Before
- 6:00 AM — Walk Block A, check sensor #1 manually
- 6:30 AM — Drive to Block B, inspect flow meter
- 7:00 AM — Adjust irrigation timer by hand at the shed
- 7:30 AM — Drive back, hope nothing changed while you were gone
After
- 6:00 AM — Open app from bed, all 12 blocks green
- EC stable overnight across every zone
- Safeguard caught a pressure drop at 2 AM — auto-closed valve
- Adjust tomorrow’s schedule from the couch in 30 seconds
Everything in one app
Bluetooth Setup
Install and configure devices from your phone via BLE pairing. No technician, no wiring.
Live Farm Map
A digital property map showing live sensor readings, valve states, and schedule status in real time.
Remote Actuation
Control valves, pumps, and greenhouse hardware from anywhere in the world — instantly.
Irrigation Scheduling
Create and manage multiple irrigation schedules across zones and crop blocks.
Offline BLE Control
Internet goes down? The Gateway auto-switches to Bluetooth mode within 15 seconds. Control valves, read sensors, and manage schedules directly from your phone — no WiFi needed.
Safeguard Alerts
Threshold-based rules for any parameter. Get notified the moment conditions drift out of range.
Event Tracking
Every command, device action, and safeguard incident is logged — full operational audit trail.
What happens when the internet drops?
Bluetooth fail-safe keeps you in control
Farmers' #1 concern about IoT: “What if my internet goes down and I can't control my irrigation?” Agrinodes has a built-in fail-safe that switches to direct Bluetooth control automatically.
Crop Protection
Protects your crop while you sleep
Overnight failures cause the most damage because nobody is watching. Agrinodes safeguards monitor 24/7 and act autonomously when thresholds are breached — before you even wake up.
- No flow during active irrigation
- Flow outside min/max bounds
- Unexpected flow when off
- Insufficient flow after pump start
- Soil too wet before irrigation
- Moisture not rising during irrigation
- EC too high during irrigation — salt risk
- Escalates to CRITICAL if >10% over threshold
- Pressure too high with no flow — blockage
- Pressure too low — supply issue
- Tank below minimum — prevents dry-run
Incident Lifecycle
Triggered → Acknowledged → Resolved
Safeguard fires, incident opens. If a critical alarm, your configured action plan executes automatically — stop the zone, close a valve, kill the pump, or disable schedules.
Grower reviews captured evidence — threshold vs. observed value, timestamp, and operational context. Each action-plan step is confirmed by the device before advancing.
Conditions return within safe bounds for a sustained recovery window. Incident closes, system resumes normal operation.
Action plan steps
Stop Zone
Close Valve
Stop Pump
Disable Schedules
Evidence captured on every incident
Threshold
Observed Value
Context
Better Crop Outcomes
Safeguards working around the clock
Prevent overwatering and root damage
VWC safeguards stop irrigation when soil is already saturated — protecting roots from anaerobic conditions.
Catch pipe failures the moment they happen
Flow and pressure monitoring detects blockages, pipe breaks, or pump failures in real time.
Manage salinity before it becomes stress
EC safeguards alert before salt levels accumulate to crop-damaging concentrations.
Configurable response for every situation
Set each safeguard to critical alarm, warning, or advisory. Critical alarms trigger multi-step action plans.
Accurate readings, accurate thresholds
Soil-specific calibration means safeguards trigger on real conditions — not sensor artefacts.
Severity levels
Informational alert — logged and visible in the app. No automated action taken.
Conditions drifting out of range. Push notification sent. Grower should investigate soon.
Immediate risk to crop or infrastructure. Action plan executes automatically — stop zone, close valve, kill pump.
DIY Setup
Set up yourself. No wires. No electrician.
Typical precision-ag installs cost $5,000+ and require a technician. Agrinodes is fully self-install — solar powered, wireless, and ready in under 30 minutes.
Plug in the Gateway
Standard GPO power outlet. Connects to your Wi-Fi network in seconds.
Open the app
Download the Agrinodes app, create your account, and log in.
Pair via Bluetooth
BLE provisioning walks you through device setup and network configuration.
Place Node in field
Solar panel facing up, connect your sensors. No wiring, no trenching.
You’re live
Data flows instantly. Map populates. Remote control available from anywhere.
Same easy setup, any sensor
Whether you plug in a $20 analogue soil stick or a $2,000 industrial SDI-12 probe, the install process is the same once that exact model is configured in Agrinodes. Check the Supported Sensors search first. If your model is not listed yet, we can usually configure it within up to a week.
~10 min
per device
~30 min
total setup
Zero
technicians needed
Zero
special tools
Fertigation integration
Agrinodes is building native support for water-driven fertigation injectors — bringing automated nutrient delivery into the same platform you already use for irrigation control, sensor monitoring, and safeguarding.
Running fertigation manually? Adjusting injector ratios by gut feel? Hoping the EC doesn't spike overnight?
Fertigation Programming
Create nutrient dose schedules tied directly to your irrigation windows — run precise ratios at defined times without manual intervention.
EC-Linked Dosing Control
Pair live EC sensor readings with injector control to automatically adjust nutrient concentration in real time and hold your target EC.
Safeguard-Integrated
Fertigation runs are governed by the same safeguard engine — EC, flow, and pressure anomalies can pause or halt dosing automatically.
Planned compatible injector units
Dosatron
Water-powered proportional injectors
MixRite
Inline fertiliser and chemical injectors
Ready to see it in action?
Try Agrinodes risk-free for 14 days. Connect your own sensor, control your own valve — and experience the difference yourself.